Special Offers

Crucible Kilns!

All Crucible Kilns feature a full two-year limited warranty. Crucible uses 3" thick brick and long-life 2500º F elements. Heavy gauge, brushed stainless steel surrounds every Crucible! UL & CSA listed. Kiln Sitter on every Crucible on ceramic kiln. For ceramics, Stoneware, Porcelain, Glass, Enameling, EVERYTHING! Years of industrial kiln experience make Crucible a better kiln!
The Next Generation of Kiln Controllers!
Affordable firing accuracy in programmable controllers!
Bartlett Controller

• Preheat: set a preheat (180º F) holding period for any Cone-Fire program
• Delay: delay the star time of a firing.
• Alarm: Set a high or low temp audible alarm.
• Cone offset: raise or lower the final cone temp.
• Cone Table: review temperature for a cone number.
• Skip Step: skip to the next programmed ramp.
• Error Messages: turn them on or off.
Easy Riser™
The Original Zero-G Raku Kiln!
Our new Easy Riser Raku Kiln makes raku firing safe, efficient and fun with its counter-balanced weight system. Centered in smooth running risers, the double-insulated kiln shell opens and closes with an easy, one-handed movement of the counterweight. Comes complete. Kiln interior is 21" high by 22" wide. Prices and accessories are listed on next page. Call or e-mail us for shipping rates!

Zone Control Option

Incorporates zone control temperature balance using 1, 2, or, 3 thermocouples (3 inputs/3 outputs). The controller senses the temperature in each section of the kiln, compares it to the desired temperature (traveling set point) and adjusts the power going to each section separately giving each just the right amount of power to keep the temperature at the correct setting

AutoFire 2000 Controller

• Three 10-segment & one 20-segment user programs.
• All program memory has power failure protection.
• Firing speed in Cone-Fires adjustable ± 10-40%
• Program Review for user programs stored in memory.
• Skip-Step feature for user programs.
• Cone Offset: adjust firing temp. for cone number.
• Kiln Temperature Alarm at kiln's target temperature.
• Handy Cone Table: Temperature/Cone Reference.
• Preheat to 200º F in Cone Fire Mode to dry ware.

The UniTemp Upgrade:

The UniTemp model uses measurements from multiple thermocouples to minimize temperature differences from top to bottom. Power is output to elements in those zones as needed to maintain uniform temperature throughout the firing cycle. This upgrade is available fro installed (hardwired) units.
To Pricing

Click Here to Send this Page To a Friend